Skip to content

New Gohighlevel Mailgun Integration8 min read

Click below to let me read the whole article for you.

How to Setup GoHigh Level With Mailgun

Mailgun can be used to manage email campaigns for your HighLevel account.

Setup of SMTP

Once you have successfully configured the SMTP for your gohighlevel mailgun account, you can begin using the platform. You will need to create a subdomain to send mail through Mailgun. Doing so is crucial as using an outside account breaks the HighLevel Reply Route. In addition, replies from external accounts will not be visible in your HighLevel Conversations. Check out our quick guide if you need help setting up your Mailgun account.

Next, you’ll need to verify your DNS settings and have to wait one or two days until the verification process is complete. Once you have completed this step, copy and paste the private API key and subdomain you just created from Mailgun into your HighLevel account. You’ll now need to add your SMTP credentials to Mailgun, and you can find them under the HighLevel subdomain.

Configuration of DNS records

To configure DNS records for gohighlevel mailgun, you must go to your DNS provider’s admin dashboard. You can find the Manage DNS option under the DNS settings tab. Then select the Mailgun subdomain. In the next step, you need to add your SMTP credentials, which can be found under the HighLevel subdomain. You can also configure a secondary domain for Mailgun using the same steps.

Setting up a subdomain in Mailgun.

You can set up a subdomain in GoHighlevel Mail gun to send emails from a specific HighLevel account. This allows you to capture cold inbound emails, such as sales leads. It is important to remember that your Mailgun account must be set up correctly to ensure that your emails are delivered. Besides that, setting up a subdomain will also enable you to set up the specific sender and recipient addresses and create a custom domain name.

The first step of setting up a subdomain in Mailgun is to verify your domain name using DNS settings. You need to add six different entries to your DNS; any mistake can cause problems. To avoid these headaches, automation can help. For example, you can set up a workflow in which Joe sets up the Mailgun domain, and Cloudflare will automatically add your API key and DNS settings. This process takes around nine seconds, resulting in an accurate, verified domain name and Mailgun API key.

Setting up replies in Mailgun.

You’ve probably heard that you need to pay for Mailgun to set up replies. This is not the case, however. If you’re not a US citizen, there are a few steps you need to follow. First, make sure you’re using a mailgun subdomain, as otherwise, you won’t be able to use replies. If you’re outside the USA, choose the US when creating a sending domain. Once you’ve done that, you can set up reactions.

To enable Mailgun’s API, go to the GHL Agency Level account settings. Click on “Manage DNS” to see the locations. Once you’ve added the subdomain, ensure you add the appropriate DNS records. This will enable Mailgun to connect to your primary domain. You can also add your GHL SMTP credentials under your domain name. Once your domain is correctly set up, go to GHL Triggers and Add Action Stages to test the functionality of Mailgun.

Mailgun is an essential tool on the HighLevel website. Dell and Microsoft use this third-party email delivery software, which is similar to Twilio. To set up replies in Mailgun, follow the steps outlined below:

 

 

How to Get Started With GoHighLevel Mailgun

If you’re new to email marketing, it can be challenging to get started with GoHighLevel Mailgun. This article will show you how to set up the software, configure DNS records, set up SMTP credentials, and add accounts. Next, learn how to set up replies. After that, you’re ready to send your first emails! But what exactly are the best ways to use Mailgun for Email Marketing? Let’s look at a few of the best practices.

Configuring DNS records

You can configure DNS records for GoHighLevel to send emails from Mailgun. Before you can start sending emails with Mailgun, you must first create a subdomain. Remember not to make any email accounts outside G-suite or HighLevel, as your replies will not be visible in conversations. If you don’t configure DNS records, your emails won’t be delivered. You should also add your phone number to your settings.

You can also configure DNS records for GoHighLevel by logging into your DNS provider’s control panel. Click the DNS tab and click Manage DNS. Enter your Mailgun subdomain and SMTP credentials. After doing so, log into your DNS provider and verify your settings. Once the DNS records are verified, you can add the API keys. You can also add a secondary domain to Mailgun using the same process.

Once you have set up your DNS records, you can configure GoHighLevel to use the Mailgun API. Click the Manage DNS option on the GoHighLevel account settings page to enable the API. You can also enter your GHL SMTP credentials under your domain name. After adding your SMTP credentials, configure GHL’s other DNS records, such as TXT, MX, and CNAME.

DNS is the key to the Internet. Your DNS records help your email to get delivered. To ensure maximum success with your email campaigns, you must configure the following 3 DNS records for your GoHighLevel account. Make sure they are correct to ensure optimum email delivery and security. You can check out these DNS records in GoHighLevel’s help center. There are many valuable tips to configure DNS records for GoHighLevel Mailgun.

The next step is to add DNS records for GoHighLevel to use your subdomain. To do this, go into your domain provider and set up the necessary DNS records. Once the DNS records are set, the DNS records for your GoHighLevel mailgun account will be visible in the report. Afterward, you can send emails with GoHighLevel and make sure your customers receive them. Email delivery depends on countless factors, and you need to ensure they are correctly configured to ensure your emails are delivered.

Setting up SMTP credentials

To set up SMTP credentials for a goHighLevel account, you must first sign in to your HighLevel account. You’ll see several different options in the settings tab, including SMTP and Mailgun services. You can change the SMTP password or copy the default one in the Advanced section. Then, click the SMTP credentials link in the settings tab to enter your SMTP credentials.

After signing up, you’ll want to configure your domain name, SMTP credentials, and DNS. If you’re unfamiliar with how to do this, you can check out Mailgun’s DNS setup tutorial. You’ll want to add your SMTP server to your DNS provider’s list. The DNS settings will be the same for both mailgun and other services, so make sure to add these records to your DNS account.

Adding accounts

Adding accounts to GoHighLevel’s API will help you trigger workflows with Mailgun. To do this:

  1. Create a new sending domain and choose ‘US’ from the drop-down list.
  2. If you’re outside the US, choose ‘US’ when creating the sending domain.
  3. Follow the steps to add accounts to GoHighLevel. You can also set up a subdomain to send emails to specific HighLevel accounts.

When you’re finished setting up your Mailgun account, log in to your account and add your email accounts. You’ll need a Credit Card to activate the service. Once you’ve done this, you’ll receive an email confirming that you’ve entered the correct information. Mailgun’s free version allows you to send up to 5,000 emails monthly for three months. Afterward, you’ll need to purchase a paid account to send unlimited emails.

To use Mailgun’s API, you’ll need to create a GHL Agency Level account. First, you’ll need to verify your DNS settings, which could take a day or more. Then, you’ll need to copy your API key and the Mailgun subdomain and paste it into your HighLevel account. After that, you’ll need to add your SMTP credentials, which can be found in the GHL Agency Level Account Settings.

You can set up campaigns under the Marketing section of HighLevel. You’ll need a good name for them. You can also create actions and events. These actions can trigger campaigns based on specific events, like cart abandonment or a customer clicking on an email. You can schedule activities on specific dates and times if you’re sending emails to more than one person. There’s also a link to your HighLevel account on your website.

Setting up replies

Mailgun is one of the most essential tools for the HighLevel website. This third-party email delivery service is similar to Twilio and is used by big companies like Dell and Microsoft. Using Mailgun on your website is easy. To get started:

  1. Go to the Receiving tab and click Create Route.
  2. Enter the SMTP credentials for your account, which are located under the HighLevel subdomain.
  3. Follow the steps below to set up replies.

HighLevel has several features that will help you reach your target audience. The setup guide will walk you through this tool’s key features and how to use it. The platform offers five channels to outreach your audience. You can create campaigns based on your customers’ actions, such as cart abandonment and customer clicks on your emails. Setting up replies for GoHighLevel emails is straightforward, and the email service is free.

 

 

 

Leave a Reply